Shop Home Products

Mold Clean Up - PAPR Powered Air Purifying Respirator Assembly Kit, Belt-Mounted with Back Pack(XLSFA6-HY01, 300 lpm)

Buy Now or Visit for More Info

About this item

• full face respirator mask
• Made in USA or Imported
• Ear Loop closure
• Headwear specifics:✨Material: Silicone ✨Inhale Resistance: 40Pa✨Exhale Resistance: 100Pa✨Port Connection: RD40 NPT✨Weight wt/ filter: 0.5kg✨Visaul Ability: 70%✨Transmittance: 0.02%✨Leakage: 0.05%✨Ingress Protection: IP-54
• Headwear Features: 🔥Large lens for wide field of view, Lightweight, balanced design, Silicone faceseal for greater comfort and durabilit 🔥Remarks: The IP54 rating indicates the unit is protected against infiltration of dusts and water splash that would interfere with normal operation
• Tubing Features: ✔️RD40 threaded, universally used and compatible with most respirators facewear product ✔️Rubber material wrapped, heat and corrasive resistant
• Filter Cartridge Style: 🔥RD40 DIN FILTER 🔥Particulate Filtration Classification: HEPA 🔥Gas and Vapor Cartridges: Available with Color-Coding System
• Note:💡1. Estimated system run time based on testing with a new battery and a new clean filter at 68ºF (20ºC). Actual system run time may be extended or shortened depending on system configuration and environment.💡2. Battery packs should be charged immediately and fully upon receipt. The battery should be recharged after each use and at least every 1 month💡3. The motor must be run for at least 5 minutes annually to ensure proper lubrication and operation